| Home

Overview


Original Research

INFLUENCE CHITOSAN AND CARBON NANODOTS (CNDs) OF THE CONTACT OIL

INDRI DAYANA 1, HABIB SATRIA 2, MUHAMMAD FADLAN SIREGAR 3, and MARTHA RIANNA 4.

Vol 18, No 12 ( 2023 )   |  DOI: 10.5281/zenodo.10376996   |   Author Affiliation: Engineering Faculty, Universitas Medan Area, Medan 20223, Sumatera Utara, Indonesia 1,2,3; Department of Physics, Universitas Sumatera Utara, Jl. Bioteknologi no.1, Medan 20155, Sumatera Utara, Indonesia 4.   |   Licensing: CC 4.0   |   Pg no: 579-592   |   Published on: 12-12-2023

Abstract

Abstract

The purpose of this work was to investigate of contact oil, Influence Chitosan and NanoDots (CNDs) of contact oil were been evaluated test conditions to simulated before and after. Bending test for polyester resin material were better before being smeared with chitosan powder, which increased by about 17 MPa. This means there is an increase in the quality of a material visually. Tensile test specimen for polyester resin material and tensile test specimen for polyester resin mixed chitosan powder shows that the results of the bending test were better after being smeared with chitosan powder, which increased by about 3 MPa. One of the most basic mechanical tests that can be performed on a base material. This test is easy to perform and provides many results regarding the characteristics of the material being tested. the tensile test after chitosan powder is better. Compress test for polyester resin material were better before being smeared with chitosan powder, which increased by about 2 MPa. This means there is an increase in the quality of a material visually.


Keywords

Chitosan, NanoDot, Filter, Contact Oil.